LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Impala Premier >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the brake fluid level indicator switch electrical connector.
  2. GM2756214

    Pressing inward through the access hole in the front of the master cylinder reservoir with a small punch or similar blunt tool, release the brake fluid level indicator switch locking tab.

  3. Remove the brake fluid level indicator switch (1).
scientia non olet · About LEMON Manuals