LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Impala Premier >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement >> Installation Procedure

Installation Procedure

  1. GM2756214

    Install the brake fluid level indicator switch (1).

  2. Ensure the locking tab of the brake fluid level indicator switch is fully engaged in the master cylinder reservoir.
  3. Connect the brake fluid level indicator switch electrical connector.
scientia non olet · About LEMON Manuals