LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Impala LT >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Paneling >> Repair Instructions >> Front Side Door Accessory Switch Mount Plate Replacement

Front Side Door Accessory Switch Mount Plate Replacement

GM2913386
Callout Component Name
1 Front Side Door Accessory Switch Mount Plate Assembly

Procedure

  1. Remove the front side door pull cup liner.
  2. Release the accessory switch mount plate metal retainer from the rear edge first using a flat-bladed tool.
  3. Rotate the accessory switch mount plate up and rearward to unhook the front retaining feature.
  4. Disconnect the electrical connector from the switch assembly.
  5. Transfer parts as necessary.
scientia non olet · About LEMON Manuals