Conditions for Running the DTC

• Accelerator Pedal Position = Less than 0.05%
• Ambient Air Temperature = Warmer than -20°C (-4°F)
• BARO Sensor 2 = Greater than 72 kPa (10 PSI)
• Deceleration Fuel Cut-Off = Active - Greater than 20 s
• ECT Sensor = 68 to 117°C (154 to 243°F)
• Engine Speed = 1350 to 2100 RPM
• Fuel Temperature = -20 to 70°C (-4 to 158°F)
• Low Fuel Indicator = Off
• Particulate Filter Regeneration Status = Not required
• Transmission = Gear 3, 4, 5, 6
• Vehicle Speed = Greater than 0 km/h (0 MPH)

Frequency the DTC runs = Once - Per drive cycle - After the running conditions are met