Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0106Condition 1
MAP Sensor & BARO Sensor 1, 2 = Not within 10 kPa (1.4 PSI) of each other.
Condition 2
MAP Sensor Not between 50 and 115 kPa (7.2 and 16.2 PSI)
P0107
MAP Sensor = Less than 0.2 V - For greater than 4.0 s
P0108
MAP Sensor = Greater than 4.5 V - For greater than 4.0 s