Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0106 Condition 1
- DTC P0101, P0102, P0103, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201, P0202, P0203, P0204, P0216, P020A, P020B, P020C, P020D, P02EE, P02EF, P02E8, P02E9, P02F0, P02F1, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0335, P0336, P062B, P062D, P111E, P122D, P1248, P1249, P124A, P124B, P126A, P16A0, P16A1, P16A2 P2147, P2148, P2150, P2151, P2227, P2228, P2229, P2230, P227C, P227D = Not set
- Engine Coolant Temperature = Warmer than 70°C (158°F)
- Engine Speed = Less than 1, 100 RPM
- Intake Air Flow Valve Position = Greater than 90%
- Ignition Voltage = Greater than 11.0 V
Frequency the DTC runs = Continuously - After the running conditions are met
Condition 2
- DTC P0107, P0108, P2228, P2229, P227C, P227D, P2610 = Not set
- DTC P0107, P0108, P2228, P2229 = Not pending
- Ignition = On & Engine = Off
- Time between current ignition cycle and the last time the engine was running = Greater than 5 s
Frequency the DTC runs = Continuously - After the running conditions are met
P0107, P0108
- Engine Cranking
- Ignition = On
Frequency the DTC runs = Continuously - After the running conditions are met