Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0046
- DTC P003A, P0071 - P0074, P0117 - P0119, P16B0, P16B1, P16B2, P2564, P2565 = Not set
- Engine Cranking
- Ignition Voltage = Greater than 11 V
- Turbocharger Vane Position Command = Steady State For greater than 500 ms
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s
P2598, P2599
- DTC P003A, P0045, P0048, P16B0, P16B1, P16B2, P16FA, P169E, P169F, P2564, P2565 = Not set
- Ignition Voltage = Greater than 11 V
- Engine Cranking
- Engine Coolant Temperature = Warmer than -7°C (19°F)
- IAT Sensor 3 = Warmer than -7°C (19°F)
- Engine Speed = Greater than 1, 500 RPM
- Turbocharger Vane Position Command = Steady State
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 500 ms