Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P142B, P1435
- DTC P142C, P142D, P142E, P142F, P1474, P1475, P1476, P1477, P1478, P16D7, P16D8, P16D9, P24B0, P24B1, P24B3, P24B5, P24B6, P24D0, U02A3 = Not set
- Ignition On
- Ignition Voltage = Greater than 11 V
- Reductant Control Module Relay = ON
Frequency the DTC runs = Continuously - After the running conditions are met
P142C, P142D, P142E, P142F, P1436
- DTC P16D7, P16D8, P16D9, P24D0, U02A3 = Not set
- Ignition On
- Ignition Voltage = Greater than 11 V
- Reductant Control Module Relay = ON
Frequency the DTC runs = Continuously - After the running conditions are met