Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P1052, P20BD, P20BF, P20C0
- DTC P205B, P205C, P205D, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P20BE
- DTC P20BD, P20BF, P20C0, P248C, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Reductant Heater 1 = On
Frequency the DTC runs = Continuously - After the running conditions are met
P248C, P248D
- DTC P205B, P205C, P205D, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Reductant Heater 1 = On
Frequency the DTC runs = Continuously - After the running conditions are met