Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P1051, P20B9, P20BB, P20BC
- DTC P205B, P205C, P205D, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met
P20BA
- DTC P20B9, P20BB, P20BC, P248A, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Reductant Heater 1 = On
Frequency the DTC runs = Continuously - After the running conditions are met
P248A, P248B
- DTC P205B, P205C, P205D, U010E = Not set
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Reductant Heater 1 = On
Frequency the DTC runs = Continuously - After the running conditions are met