Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P1048, P2047, P2049
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Injector Duty Cycle = Greater than 10%
Frequency the DTC runs = Continuously - After the running conditions are met
P1049, P2048
- Ignition On or Engine Running
- Ignition Voltage = Greater than 11 V
- Injector Duty Cycle = 0%
Frequency the DTC runs = Continuously - After the running conditions are met