Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
P119D, P119E, P119F, P11BE, P11BF, P11C0, P11C7, P11C8, P11D0, P11D1, P11D2, P11D8, P11D9, P11DA, P11FC, P11FD, P11FE, P22A3, P22A4, P22A5, P22A6, P22A8, P22A9
- DTC U029E is not set
- The ignition voltage is greater than 11 V
- The NOx Sensor 2 Heater Operation parameter displays Allowed
- The NOx sensor supply voltage is greater than 10.8 V.
These DTCs run continuously when the above conditions are met
P11D5
- DTC P003A, P0087, P00C7, P00E9, P00EA-P00EC, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201-P0204, P020A-P020D, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02E0, P02E2-P02E5, P02E8, P02E9, P02EB, P02EE, P02EF, P02F0, P02F1, P0335, P0336, P0400, P0403, P0405, P0406, P042E, P042F, P049D, P0490, P062B, P062D, P111E, P119D-P119F, P11BE, P11BF, P11C0, P11C7, P11C8, P11D0-P11D2, P11D8, P11D9, P11DA, P11DC, P11DE, P11FC-P11FE, P122B-P122D, P1248, P1249, P124A, P124B, P1402, P1407, P140F, P1424, P1425, P16A0, P16A1, P16A2, P16D7-P16D9, P2147, P2148, P2150, P2151, P220B, P228A, P228B, P229E, P22A0, P22A1, P22A3-P22A9, P22FE, P2459, P245C, P2262, U029E is not set
- The ignition voltage is greater than 11 V
- The NOx Sensor 2 Heater Operation parameter displays Allowed
- The NOx sensor supply voltage is greater than 10.8 V.
- The engine speed is between 550 - 4, 500 RPM.
- The injection fuel quantity is less than 20mm3 .
- Time elapsed since diesel particulate filter regeneration is greater than 300 s.
These DTCs run continuously when the above conditions are met
P11DC
- DTC P119D-P119F, P11BE, P11BF, P11C0, P11C7, P11C8, P11D0-P11D2, P11D8, P11D9, P11DA, P11DE, P11FC-P11FE, P220B, P229E, P22A3-P22A9, or U029E is not set.
- The engine is running.
- The ignition voltage is greater than 11 V.
- The NOx Sensor 2 Heater Operation parameter displays Allowed.
- The injection fuel quantity is less than 35mm3 .
- The NOx sensor supply voltage is greater than 10.8 V.
The DTC runs continuously when the above conditions are met.
P22A0, P22A1
- DTC P119D-P119F, P11BE, P11BF, P11C0, P11C7, P11C8, P11D0-P11D2, P11D8, P11D9, P11DA, P11DC, P11DE, P11FC-P11FE, P220B, P229E, P22A3-P22A9, or U029E is not set.
- The engine is running.
- The ignition voltage is greater than 11 V.
- The NOx Sensor 2 Heater Operation parameter displays Allowed
- The NOx sensor supply voltage is greater than 10.8 V.
These DTCs run continuously when the above conditions are met.
P22A7
- DTC U029E is not set
- The ignition voltage is greater than 11 V.
- The NOx Sensor 2 Heater Operation parameter displays Allowed
- The NOx sensor supply voltage is greater than 10.8 V.
The DTC runs continuously when the above conditions are met for greater than 180 s.
P22FE
- DTC P0070, P0071, P0072, P0073, P00C7, P0E9, P0EA-P0EC, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201-P0204, P020A-P020D, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02EE, P02EF, P02F0, P02F1, P0335, P0336, P0405, P0406, P049D, P0545, P0546, P062B, P062D, P111E, P113B, P113C, P113D, P113F, P115E, P115F, P1160, P116A, P116B, P116C, P116D, P116E, P116F, P118E, P118F, P1192-P1194, P1196, P1198, P119A-P119F, P11BE, P11BF, P11C0, P11C5-P11C8, P11CC, P11D0-P11D2, P11D8, P11D9, P11DA-P11DD, P11FC-P11FE, P1248, P1249, P124A, P124B, P2032, P2033, P2081, P2085, P20CB, P20CD, P20CE, P2147, P2148, P2150, P2151, P2200, P2205-P2211, P220A, P220B, P2227, P2228, P2229, P2230, P229E, P22A0, P22A1, P22A3-P22A9, P22F9, P22FA, P242C, P242D, P242E, P2452, P2453, P2454, P2455, P2456, P2481, P2482, P2484, P262B, P2670, U029D or U029E is not set
- The Engine Controls Ignition Relay Feedback Signal voltage is greater than 11 V
- The NOx Sensor 1 and 2 Heater Operation parameters display Allowed
- The NOx sensor supply voltage is greater than 10.8 V.
- The engine speed is between 0 - 1, 500 RPM.
The DTC runs up to 10 times per ignition cycle when the above conditions are met.