Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For an overview of the component/system, refer to : Fuel System Description
| Circuit | Description |
|---|---|
| Control | The output circuit is switched to 12 V to activate the component. |
| Ground | The output circuit is switched to ground to activate the component. |
| Component | Description |
|---|---|
| K20 Engine Control Module | The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly. |
| KR23A Fuel Pump Relay | A relay is a switch that is actuated by a solenoid. |