Conditions for Running the DTC

• DTC P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0171, P0172, P0300, P0301, P0302, P0303, P0304, P0400, P0401, P0402, P0403, P0405, P0406, P042E, P042F, P0462, P0463, P0489, P0490, P049D, P062D, P0502, P0503, P0722, P0723, P0806, P0807, P0808, P140B, P140C, P2227, P2228, P2229, P2230, P2271 = Not set
• Barometric Pressure = Greater than 70 kPa (10 PSI)
• { If equipped } Clutch Pedal = Not Pressed
• { If equipped } Clutch Pedal = Engaged Less than 12%
• { If equipped } Clutch Pedal = Engaged Greater than 75%
• Engine = Running - For greater than 1 min
• Engine = Idling - For greater than 5 s
• Engine Coolant Temperature = Greater than 60°C (140°F)
• Engine speed varies less than +/-25 RPM
• Ignition Voltage = 11 to 32 V
• Intake Air Temperature Sensor = Greater than -20°C (-4°F)
• Scan Tool Control Functions = Inactive
• Torque Converter Clutch = Inactive
• Transmission = Not Shifting
• Vehicle Speed = Less than 1.6 km/h (1 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 10 s