Conditions for Running the DTC

• DTCs related to the following system/component = Not Set
  • B23 Camshaft Position Sensor
  • B52 Heated Oxygen Sensor
  • B66 Intake Air Temperature Sensor
  • B74 Manifold Absolute Pressure Sensor
  • B75C Multifunction Intake Air Sensor
  • Q12 Evaporative Emission Purge Solenoid Valve
  • Q17 Fuel Injector
  • Q38 Throttle Body
  • Engine Misfire
• Air/Fuel Ratio Imbalance = Not within a calibrated range - Bank 1
• BARO Sensor = Greater than 70 kPa (10.2 PSI)
• Engine Coolant Temperature @ Cold Start-Up = Greater than -20°C (-4°F)
• Evaporative Emission (EVAP) Purge System = Inactive
• IAT Sensor = -20 to 200°C (-4 to 392°F)
• MAP Sensor = 0 to 200 kPa (0 to 29 PSI)
• Vehicle Speed = 58 to 125 km/h (36 to 78 MPH)

Frequency the DTC runs = Continuously - After the running conditions are met