Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P013A, P013B, P013C, P013D
Heated Oxygen Sensor = Not within a calibrated range
P013E, P014A
The following scan tool parameters are not within a calibrated range of the calculated air flow : Heated Oxygen Sensor - Greater than 450 mV
P013F, P014B
The following scan tool parameters are not within a calibrated range of the calculated air flow : Heated Oxygen Sensor - Less than 350 mV
P015A, P015B, P015C, P015D
Heated Oxygen Sensor = Not within a calibrated range - For greater than 60 s
P2270, P2272
Heated Oxygen Sensor = Greater than 800 mV
P2271, P2273
Heated Oxygen Sensor = Less than 100 mV