Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0030, P0036, P0050, P0056
Control Circuit = The control module detects an open circuit. - For greater than 5 s
P0031, P0037, P0051, P0057
Control Circuit = The control module detects a short to ground. - For greater than 5 s
P0032, P0038, P0052, P0058
Control Circuit = The control module detects a short to voltage. - For greater than 5 s
P0053, P0054, P0059, P0060
Control Circuit = Resistance Out Of Range @ Start-up
P0135, P0155
HO2S Heater = Circuit Current Out Of Range - For greater than 8 s
P0141, P0161
HO2S Heater = Circuit Current Out Of Range - For greater than 8 s