Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
For details refer to the owner's manual.
| Circuit | Description |
|---|---|
| Signal | The control module input circuit has an internal resistance connected to 12 V. |
| Ground | Chassis Ground |
| Component | Description |
|---|---|
| K9 Body Control Module | The control module contains a microprocessor used to process input data to control outputs.The control module receives information from a variety of sensors, switches and serial data information from other control modules. This information is used to control a combination of solenoid valves to obtain the correct line pressure, gear ratio and torque converter clutch operation. |
| S18 Exhaust Brake Switch | The switch has a normally open contact. |