Ignition Coil Replacement

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Engine Cover Replacement Remove The Spark Plug Wire At The Ignition Coil. spark Plug Wire Replacement Disconnect The Electrical Connector.
1	Ignition Coil Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Ignition Coil

Callout

Component Name

Preliminary Procedures

Ignition Coil Bolt [2x]

CAUTION:

Tighten
10 N.m (89 lb in)

Ignition Coil