Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Fuel Feed Hydrocarbon Injection Front Pipe (1) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Fuel Feed Hydrocarbon Injection Front Pipe (1) @ Retainer (2) - Remove [4x]
- NOTE:
Remove black plastic cap from top of injector before installing CH-49736 Hydrocarbon Injector Quick Connect Release Tool.
Fuel Feed Hydrocarbon Injection Front Pipe (1) - Disconnect - CH-49736 Hydrocarbon Injector Quick Connect Release Tool
- Fuel Feed Hydrocarbon Injection Front Pipe (1) @ Retainer (2) - Remove [2x]
WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .