Removal Procedure
WARNING: This page is about a different variant/trim than selected.
CAUTION:
The exhaust temperature sensor and exhaust pressure differential sensor line fittings may be difficult to remove when the engine exhaust system temperature is below 48°C (120°F). Excessive force may damage the threads in the exhaust manifold or exhaust pipe.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Exhaust Pressure Differential Sensor Pipe Clamp (1) - Remove [2x] - Hose Clamp Replacement Guidelines - Spring Type
- Exhaust Pressure Differential Sensor Pipe (2) - Remove [2x]
Exhaust Pressure Differential Sensor Pipe Fittings (1) - Remove [2x]
Exhaust Pressure Differential Sensor Pipe (1) - Remove