Exhaust Gas Recirculation Cooler Replacement
WARNING: This page is about a different variant/trim than selected.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Exhaust Gas Recirculation Valve Replacement |
|
| 1 | Exhaust Gas Recirculation Valve Cooling Feed Hose Clamp Hose Clamp Replacement Guidelines - Spring Type |
| 2 | Exhaust Gas Recirculation Cooler Bolt[6x]
CAUTION:
Refer to Fastener Caution . Tighten 14.7 N.m (11 lb ft) |
| 3 | Exhaust Gas Recirculation Cooler Gasket Procedure Install a NEW gasket. |
| 4 | Exhaust Gas Recirculation Cooler |