Removal Procedure
WARNING: This page is about a different variant/trim than selected.
Remove Emission Reduction Fluid Tank Fuel Fill Cap and Tether.
- Emission Reduction Fluid Tank Filler Pipe Bolt (1) - Remove [4x]
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Emission Reduction Fluid Tank Filler Vent Hose (1) - Remove
- Emission Reduction Fluid Tank Filler Hose Clamp (2) - Remove - Hose Clamp Replacement Guidelines - Spring Type
- Emission Reduction Fluid Tank Filler Hose (3) - Remove
- Emission Reduction Fluid Tank Filler Pipe (4) - Remove