LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions) >> Repair Instructions >> Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4603712Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (1) - Connect - Plastic Collar Quick Connect Fitting Service 

  2. GM4603706Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (1) @ Retainer (2) - Install[5x]

  3. GM4603701Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (1) @ Retainer (2) - Install [4x]

  4. GM4603693Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (2) @ Retainer (3) - Install [4x]

  5. Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (2) - Connect - Plastic Collar Quick Connect Fitting Service 
  6. Electrical Connector (1) - Connect
  7. GM4603774Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Tank Shield (2) - Install

  8. Emission Reduction Fluid Tank Shield Retainer (1) - Install [4x]
  9. Lower the vehicle.
scientia non olet · About LEMON Manuals