Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that DTCs P0070, P0071, P0072, P0073, P0074, P00C7, P00E9, P00EA, P00EB, P00EC, P0100, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0201, P0202, P0203, P0204, P020A, P020B, P020C, P020D, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02EE, P02EF, P02F0, P02F1, P0405, P0406, P049D, P0502, P0503, P062B, P062D, P0722, P0723, P111E, P1248, P1249, P124A, P124B, P126A, P202E, P2147, P2148, P2150, P2151, P2227, P2228, P2229, or P2230 are not set.
- If any of the DTCs are set
- Refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- Perform the scan tool Reductant System Tamper Warning Service Bay Test after diagnosing other DTCs
- If the test does not pass
Refer to Circuit/System Testing.
- Go to next step : If the test passes
Go to next step : All OK.
- If the test does not pass
- Go to next step : If no other DTCs are set
- Verify that DTC P2BAA is not set
- If the DTC is set
Refer to Circuit/System Testing
- Go to next step : If no DTC is set
- If the DTC is set
- All OK.