Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON
- Verify DTC P00C7, P00E9, P00EA, P00EB, P00EC, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201-P0204, P020A-P020D, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02EE, P02EF, P02F0, P02F1, P0405, P0406, P049D, P0545, P0546, P111E, P113B, P113C, P113D, P113F, P115E, P115F, P1160, P116A, P116B, P116C, P116D, P116E, P116F, P118E, P118F, P1192, P1193, P1194, P1196, P1198, P119A, P119B, P119C, P11C5, P11C6, P11DB, P11DD, P1248, P1249, P124A, P124B, P126A, P2032, P2033, P2081, P2085, P2200, P2205, P2206, P2207, P2208, P2209, P2210, P220A, P2211, P2147, P2148, P2150, P2151, P2227, P2228, P2229, P2230, P242C, P242D, P242E, P2452-P2456, P2481, P2482, or P2484 is not set.
- If any of the DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step : If none of the DTCs are set
- If any of the DTCs are set
- Verify that DTCs P2627 or P2628 are not set
- If any of the DTCs are set
Replace the B195A Nitrogen Oxides Sensor 1
- Go to next step : If none of the DTCs are set
- If any of the DTCs are set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Replace the B195A Nitrogen Oxides Sensor 1
- Go to next step : If no DTC sets
- If the DTC sets
- All OK.