Conditions for Running the DTCs
WARNING: This page is about a different variant/trim than selected.
- DTC P00C7, P00E9, P00EA, P00EB, P00EC, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0119, P0128, P0201, P0202, P0203, P0204, P020A, P020B, P020C, P020D, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02EE, P02EF, P02F0, P02F1, P0405, P0406, P049D, P0502, P0503, P062B, P062D, P0722, P0723, P111E, P113E, P1197, P1248, P1249, P124A, P124B, P126A, P2147, P2148, P2150, P2151, P2470, P2471, or P2472 is not set.
- Ignition voltage is greater than 11 V.
- Vehicle speed is greater than 3 km/h (2 mph).
- The ECM is commanding a DPF regeneration.
The DTCs run continuously when the above conditions are met.