Conditions for Running the DTC

P2452

• DTCs P2453, P2454, P2455, P2456, or P262B are not set.
• The ignition has been OFF for greater than 10 s.
• The engine is not running.
• The ignition is ON.

The DTC runs when the above conditions are met.

P2453

• DTCs P0101, P0102, P0103, P113E, P2452, P2454, P2455, P2456, P2470, P2471, or P2472 are not set.
• The ignition is ON or the engine is running.
• The engine is not cranking.
• The battery voltage is greater than 11 V.

P2454, P2455

• The ignition is ON or the engine is running.
• The engine is not cranking.
• The ignition voltage is greater than 11 V.

These DTCs run when the above conditions are met.

P2456

• DTCs P2454 and P2455 are not set.
• The ignition is ON or the engine is running.
• The engine is not cranking.
• The ignition voltage is greater than 11 V.

The DTC runs when the above conditions are met.