Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that DTCs P0070, P0071, P0072, P0073, P0074, P00C7, P00E9, P00EA, P00EB, P00EC, P0100, P0101, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0201, P0202, P0203, P0204, P020A, P020B, P020C, P020D, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P02EE, P02EF, P02F0, P02F1, P0405, P0406, P049D, P0502, P0503, P062B, P062D, P0722, P0723, P111E, P1248, P1249, P124A, P124B, P126A, P202E, P2147, P2148, P2150, P2151, P2227, P2228, P2229, or P2230 are not set.
- If any of the DTCs are set
- Refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- Perform the scan tool Reductant System Malfunction Warning Service Bay Test after diagnosing other DTCs
- If the test does not pass
Refer to Circuit/System Testing.
- Go to next step : If the test passes
Go to next step : All OK.
- If the test does not pass
- Go to next step : If no other DTCs are set
- Verify that DTC P20EE, P249D, or P249E is not set
- If a DTC is set
Refer to Circuit/System Testing
- Go to next step : If no DTC is set
- If a DTC is set
- All OK.