Component Testing
WARNING: This page is about a different variant/trim than selected.
Static Test
- Ignition/Vehicle - Off
- Disconnect the electrical connector : Q67 Exhaust Aftertreatment Fuel Injector
- Test for 10 to 14 ohms between the test points : Control terminal 1 & Control terminal 2
- If not between 10 and 14 ohms
Replace the component : Q67 Exhaust Aftertreatment Fuel Injector
- Go to next step : If between 10 and 14 ohms
- If not between 10 and 14 ohms
- All OK.