Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P204B
- DTC P103F, P1040, P1048, P1049, P2047, P2048, P2049, P204C, P204D, P208A, P208C, P208D, P20E9, P214E = Not set
- After-Run = Complete
- Ignition Voltage = Greater than 11 V
- Reductant System = Not Frozen
- Reductant System = Warmer than -7°C (19°F)
Frequency the DTC runs = After ignition Off - After the running conditions are met
P204C, P204D
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously - After the running conditions are met