Component Testing
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF.
- Disconnect the KR23A fuel pump relay.
- Test for 70 - 110 Ω between terminals 85 and 86.
- If not between 70 - 110 Ω
Replace the KR23A fuel pump relay.
- Go to next step: If between 70 - 110 Ω
- If not between 70 - 110 Ω
- Test for infinite resistance between the following terminals:
- 30 and 86
- 30 and 87
- 30 and 85
- 85 and 87
- If less than infinite resistance
Replace the KR23A fuel pump relay.
- Go to next step: If infinite resistance
- Install a 20 A fused jumper wire between relay terminal 85 and 12 V.
- Install a jumper wire between relay terminal 86 and ground.
- Test for less than 2 Ω between terminals 30 and 87.
- If 2 Ω or greater
Replace the KR23A fuel pump relay.
- Go to next step: If 2 Ω or less
- If 2 Ω or greater
- All OK