LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P2264 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Fuel System Description

Circuit Description
Signal The control module input circuit has an internal resistance connected to 5 V.
Ground Chassis Ground
Component Description
E11A Fuel Heater/Water in Fuel Sensor The sensor uses two electrodes to measure the electric conductivity of the fluid in the fuel filter assembly. Since water has a higher conductivity than diesel fuel, it can be determined how much water is in the filter.
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
scientia non olet · About LEMON Manuals