LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Controls And Fuel - 2.8L (LWN) Diesel - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P20CB, P20CD, P20CE, P2670, or P2671 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Exhaust Aftertreatment System Description

Circuit Description
Control - Terminal 1 The output circuit is switched to 12 V to activate the component.
Control - Terminal 2 The output circuit is switched to ground to activate the component.
Component Description
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
Q67 Exhaust Aftertreatment Fuel Injector A solenoid valve is an electro-mechanically operated valve. The valve is controlled by an electric current through the solenoid.
scientia non olet · About LEMON Manuals