Circuit/System Verification
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Command the Positive Crankcase Ventilation Heater ON and OFF with a scan tool while observing the following control circuit status parameters:
- Positive Crankcase Ventilation Heater Control Circuit Open Test Status
- Positive Crankcase Ventilation Heater Control Circuit Low Voltage Test Status
- Positive Crankcase Ventilation Heater Control Circuit High Voltage Test Status
Each parameter should not display Malfunction.
- If Malfunction is displayed
Refer to Circuit/System Testing.
- Go to next step: If Malfunction is not displayed
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.