Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
P0335Condition 1
- Starter = Active
- Camshaft Position Sensor = Signal received
Condition 2
- DTC P0101, P0102, P0103 = Not set
- MAF Sensor = Greater than 2. 0 g/s
Condition 3
- Engine = Running
- Starter = Inactive
Condition 4
- DTC P0340, P0341 = Not set
- Engine = Running
Condition 5
- DTC P0340, P0341 = Not set
- Starter = Active
P0336Condition 1
- DTC P0335 = Not set
- MAF Sensor = Greater than 2. 0 g/s
- Engine Speed = Greater than 450 RPM
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- Starter = Active
- Camshaft Position Sensor = Signal received
Condition 4
- DTC P0101, P0102, P0103 = Not set
- MAF Sensor = Greater than 2. 0 g/s
Condition 5
- DTC P0340, P0341 = Not set
- Engine = Running
Condition 6
- DTC P0340, P0341 = Not set
- Starter = Active
Frequency the DTC runs = Continuously - After the running conditions are met