Circuit/System Verification
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Press and release the switch:Lane Departure Warning Switch
Verify the scan tool parameter:Lane Departure Warning Switch Status=Active & Inactive
- If not the specified values
Refer to Circuit/System Testing.
- Go to next step: If the specified values
- If not the specified values
- All OK.