Front Side Door Window Belt Reveal Molding Replacement

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Side Door Window Belt Reveal Molding Procedure Place the front door window in the full down position. Apply masking tape to the outer applique and door frame. Using the appropriate tool, lift the belt molding up to remove from the door flange. Press firmly to insert the front side door window belt reveal molding back on the door flange. Inspect the window for proper operation.

Callout

Component Name

Front Side Door Window Belt Reveal Molding

Procedure

Place the front door window in the full down position.
Apply masking tape to the outer applique and door frame.
Using the appropriate tool, lift the belt molding up to remove from the door flange.
Press firmly to insert the front side door window belt reveal molding back on the door flange.
Inspect the window for proper operation.