LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Side Front Door Weatherstrip Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM333914Courtesy of GENERAL MOTORS COMPANY

    Use the following method in order to install the side front door weatherstrip to the channel on the side of the door:

    1. Apply a mild soap and water solution to the side front door weatherstrip.
    2. Start the installation at the bottom of the channel in the door.
    3. Slide the side front door weatherstrip up the channel to the top of the door.
  2. Install the side front door weatherstrip to the top of the door.

    If you are reusing the old weatherstrip, use GM Weatherstrip Adhesive GM P/N 12345097 (Canadian P/N 10953479) or the equivalent, in order to retain the top of the weatherstrip to the door.

  3. Install the retainer in the top of the weatherstrip to the door.
  4. Install the side front door weatherstrip to the bottom of the door.
  5. Press the retainers in the side front door weatherstrip into the holes in the door.