Hood Primary Latch Release Cable Replacement: Notes
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Removal Procedure
- Body Hinge Pillar Trim Panel - Remove - Body Hinge Pillar Trim Panel Replacement
Radiator Air Upper Baffle(1) - Remove - Radiator Air Upper Baffle Replacement (LWN)Radiator Air Upper Baffle Replacement (LV1)Radiator Air Upper Baffle Replacement (L96, LC8)
Disconnect the cable end retainer (1) from the latch.
Remove the hood primary latch release cable handle (2)
- Remove the hood primary latch release cable retainer from the wiring harness by the master cylinder.
- Disconnect the cable from the handle (2) and attach mechanics wire to the cable.
- Pull the cable into the passenger compartment and remove.