LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4841452Courtesy of GENERAL MOTORS COMPANY

    Install the cable through the dash panel.

  2. Remove the attach mechanics wire from cable.
  3. Install the hood primary latch release cable to the handle (2).
  4. Secure the cable to the remaining clip on the wire harness by the master cylinder.
  5. GM4841450Courtesy of GENERAL MOTORS COMPANY

    Connect the hood primary latch release cable to the primary latch.

  6. GM4841449Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Upper Baffle(1) - Install - Radiator Air Upper Baffle Replacement (LWN)Radiator Air Upper Baffle Replacement (LV1)Radiator Air Upper Baffle Replacement (L96, LC8)

  7. Body Hinge Pillar Trim Panel - Install - Body Hinge Pillar Trim Panel Replacement
scientia non olet · About LEMON Manuals