LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Rear Bench Seat Removal and Installation (With Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the seat belts.
  2. GM5151803Courtesy of GENERAL MOTORS COMPANY

    Pull the 2 pin handles up to disengage the seat locking pins (1) from the retaining clip and pull the pins out.

  3. Pull the left rear split bench seat (2) rearward and lift the seat from the floor rails.
  4. GM5151804Courtesy of GENERAL MOTORS COMPANY

    Pull the 2 pin handles up to disengage the seat locking pins (1) from the retaining clip and pull the pins out.

  5. Pull the right rear split bench seat (2) rearward and lift the seat from the floor rails.
scientia non olet · About LEMON Manuals