LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Mechanical - 6.0L (L96 LC8)) >> Repair Instructions - On Vehicle >> Valve Lifter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM1403318Courtesy of GENERAL MOTORS COMPANY

    Remove the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side , or Cylinder Head Replacement - Right Side .

  2. Remove the valve lifter guide bolts (211).
  3. Remove the valve lifters and guide (210).
    4. NOTE:

    Some valve lifters may be stuck in their bores because of gum or varnish deposits.

  4. Use J 3049-A  Valve Lifter Remover or equivalent in order to remove the valve lifters (if required).
  5. GM1403319Courtesy of GENERAL MOTORS COMPANY

    Remove the valve lifters (209) from the guide (210).

  6. Organize or mark the components so that they can be installed in the same location from which they were removed.
  7. Clean and inspect the valve lifters. Refer to Valve Lifter and Guide Cleaning and Inspection .
scientia non olet · About LEMON Manuals