Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When reusing valve lifters, install the lifters to their original locations.
Lubricate the valve lifters and engine block valve lifter bores with clean engine oil.
- Insert the valve lifters (209) into the lifter guides (210).
Align the flat area on the top of the lifter with the flat area in the lifter guide bore. Push the lifter completely into the guide bore.
Install the valve lifters (209) and guide (210) to the engine block.
CAUTION:Refer to Fastener Caution .
- Install the valve lifter guide bolts (211).
- Install the valve lifter guide bolt (211) and tighten to 12 N.m (106 lb in).
- Install the cylinder head and gasket. Refer to Cylinder Head Replacement - Left Side , or Cylinder Head Replacement - Right Side .