Installation Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Oil Level Indicator Tube O- Ring (1) - Install a NEW O- Ring seal.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install the oil level indicator tube (1) between the exhaust manifold and engine block.

Oil Level Indicator Tube (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The oil level indicator tube must be installed with the collar flush to the block.

Oil Level Indicator Tube @ Engine Block (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution

Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 25 N.m (18 lb ft)
Courtesy of GENERAL MOTORS COMPANY

Oil Level Indicator Tube- Upper - Install - Oil Level Indicator Tube Replacement (Upper)
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Splash Shield- Right Side (3) - Install - Wheelhouse Splash Shield Replacement (Right Side)