Installation Procedure
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
Clean the threads of the engine oil pressure sensor (1) and apply sealer. Adhesives, Fluids, Lubricants, and Sealers .
- CAUTION:
Refer to Component Fastener Tightening Caution .
Use a suitable torque wrench and the J-41712 socket (1) to install the engine oil pressure sensor (2) and tighten to 35 N.m (26 lb ft).
Connect the electrical connector (1).
- Engine Cover - Install - Engine Cover Replacement
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery)