LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Express 2500 LS, 6.0L Eng VIN G >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Mechanical - 6.0L (L96 LC8)) >> Repair Instructions - On Vehicle >> Camshaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radiator Refer to Radiator Replacement (L96, LC8) .
  2. Remove the a/c condenser. Refer to Air Conditioning Condenser Replacement (L96, LC8, LWN) .
  3. Remove the valve lifters. Refer to Valve Lifter Replacement 
  4. Remove the Timing Chain, Camshaft Position Actuator, and Solenoid Valve. Refer to Timing Chain, Crankshaft Sprocket, Camshaft Position Actuator, and Solenoid Valve Replacement 
  5. GM1969013Courtesy of GENERAL MOTORS COMPANY

    Remove the camshaft retainer bolts (204) and retainer (203).

  6. GM1704626Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

    Install a bolt into the camshaft.

  7. Using the bolt as a handle, carefully rotate and pull the camshaft out of the engine block.
  8. Clean and inspect the camshaft and bearings. Refer to Camshaft and Bearings Cleaning and Inspection .
scientia non olet · About LEMON Manuals