Oil Pump Assemble
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Prior to assembling the oil pump, coat all wear or internal surfaces with clean engine oil.
Install the driven gear (412) into the pump housing (413).
Install the driven gear with the orientation mark facing the pump cover.
- Install the drive gear (410) into the pump housing.
- Install the oil pump cover (409).
- Install the oil pump cover bolts (408) and tighten to 12 N.m (106 lb in).
- Install the relief valve (414).
- Install the relief valve spring (415).
- Install the relief valve plug (416) and tighten to 14 N.m (124 lb in).
- Inspect the oil pump for smooth operation by rotating the drive gear.
CAUTION:
Refer to Fastener Caution .