Intake Manifold Removal
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
- The intake manifold, throttle body, fuel injection rail, and fuel injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.
- DO NOT use the intake manifold-to-cylinder head gaskets again.
Remove the positive crankcase ventilation (PCV) hose - dirty air (716).
Remove the manifold absolute pressure (MAP) sensor (714) and retainer (736), as required.
- Remove the O- Ring (715) from the sensor, as required.
Remove - Intake Manifold Bolt (512)
- Remove - Intake Manifold (500)
Remove and DISCARD the intake manifold gaskets. (514)