Engine Block Valley Cover Installation
WARNING: This page is about a different car, the 2019 GMC Savana 3500, 2019 GMC Savana 2500, 2019 Chevrolet Express 3500, and 2019 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
All gasket surfaces should be free of oil or other foreign material during assembly.
Lubricate the O- Ring seals with clean engine oil.
- Install the O- Ring seals (537) to the cover (555).
- Install the cover (555), gasket (556), and bolts (506). Tighten the manifold bolts to 25 N.m (18 lb ft).
Apply sealant to the threads of the sensor. Adhesives, Fluids, Lubricants, and Sealers
- Install the oil pressure sensor (706) and sealing washer (707). Tighten the sensor to 35 N.m (26 lb ft).
CAUTION:
Refer to Fastener Caution .